For those of you not familiar with our Cable Staking
System, the following is a step by step instructional for your
education.
Unlike conventional re-rod or wood/plastic stakes, our cable stakes are
durable, light weight anchoring devices for all kinds of outdoor use.
Your choice when maximum holding power is needed. Hunters,
Trappers, Campers and Dog Trainers use them just about anywhere for a
solid anchoring system.
Step 1)
Find a suitable trap site location or area.
Step 2)
Prepare the trap bedding and attach the cable stake to the trap.
Step 3)
Insert the cable driver end into the cable stake and prepare to drive
the cable stake into the
ground.
Step 4)
Begin to hammer the cable stake into the ground.
Step 5)
Hammer the cable stake down into the ground just until the top of the
cable stake loop is above the ground.
Note: In heavy soils or rocky ground you do not have to drive the
cable stake totally into the ground.
Many times you only have to only drive the cable stake half way into the
ground, depending greatly on the soil type.
Then, just twist and lift to remove the driver.
Be sure to tug from your trap chain to lock the stake into the ground.
2008 Kishel's Scents & Lures, Inc - All
Rights Reserved
No text or image can be utilized from this site without permission.
Prices and
specifications are subject to change without notice. Not
responsible for typographical or illustrative errors.
Cable
Stake System
